Pocket ORP Tester, ORP-P20, ORP-P10

Description

•1 point offset calibration allows adjusting the displayed value to a known standard

•Relative and absolute millivolt modes ensure the reliable ORP measurements

•Auto-Read function senses and locks the measurement endpoint

•Auto-Power Off effectively conserves battery life

•Reset function automatically resumes all settings back to the factory defaults

orp tester (2).png orp tester (3).png

Ordering Information

•ORP-P10: Tester and plastic box

•ORP-P20: Tester, 501 ORP electrode, solution storage bottles and carrying case

Optional ORP Electrodes

•501: Suitable for general purpose applications

•504: Suitable for high temperature samples (< 100°C/212°F)

orp tester (4).png orp tester (1).png

	Model	ORP-P10	ORP-P20
ORP	mV Range	±999mV	±999mV
	Relative mV Range	±999mV	±999mV
	Resolution	1mV	1mV
	Accuracy	±2mV	±2mV
	Calibration Points	1 point	1 point
Other Specification	Sensor Type	E-ORP scan-S ORP electrode	5 series ORP electrodes
	Sensor Material	Platinum sheet	Platinum pin or platinum band
	Connector	——	BNC
	Hold Function	Manual or auto-endpoint	Manual or auto-endpoint
	M	8 minutes after last key pressed	8 minutes after last key pressed
	Operating Temperature	0-50°C	0-50°C
	Display	Dual-line LCD (21×21 mm)	Dual-line LCD (21 x21mm\|
	Power Requirements	2×1.5V AAA batteries	2 x1.5V AAA batteries
	Battery Life	Approximately 200 hours of continuous use	Approximately 200 hours of continuous use
	Dimensions	185(L\|x40(Dia.)mm	175(L)x40(Dia.)mm
	Weight	100g	100g